mikrozid® universal liquid
Low-alcohol, rapid disinfection of non-invasive medical devices and surfaces.
Our Plus
- suitable for disinfecting sensitive communication devices
- dermatologically tested
- ready to use
Downloads
Fields of Application
The product is suitable for disinfecting medical devices and other surfaces. Our versatile, rapid disinfectant is also suitable for disinfecting sensitive communication devices. Smartphones and tablets are among the most common hand contact surfaces. With mikrozid® universal, these can be safely prepared without damaging the materials.
Microbiological efficacy
| Efficacy | Concentration | Contact time |
|---|---|---|
| bactericidal EN13727 - dirty conditions | ready-to-use | 15 sec. |
| bactericidal EN16615 - clean conditions | ready-to-use | 1 min. |
| tuberculocidal EN14348 - clean conditions | ready-to-use | 5 min. |
| yeasticidal EN13624 - dirty conditions | ready-to-use | 1 min. |
| yeasticidal in accordance with VAH - dirty conditions | ready-to-use | 2 min. |
| virucidal against enveloped viruses EN14476 - dirty conditions | ready-to-use | 15 sec. |
| limited spectrum virucidal activity EN14476 - dirty conditions | ready-to-use | 15 min. |
| Norovirus EN14476 - clean conditions | ready-to-use | 30 sec. |
| Norovirus EN14476 - dirty conditions | ready-to-use | 1 min. |
| Polyoma SV40 in accordance with DVV (German Registered Association for Combating Viral Diseases | ready-to-use | 15 sec. |
| Rotavirus EN14476 - clean conditions | ready-to-use | 15 sec. |
Certificates
- IHO listed
- VAH certificate
Product data
100 g solution contains the following active substances: 17,4 g Propan-2-ol, 12,6 g Ethanol (94 % w/w)
Labelling according to Regulation (EC) No. 648/2004: < 5% anionic surfactants
Labelling according to Regulation (EC) No. 648/2004: < 5% anionic surfactants
Chemical-physical data
Form:liquid
Flash point:26 °C / Method : DIN 51755 Part 1
Density:ca. 0,95 g/cm3
Viscosity, dynamic:not determined
Color:colourless
pH:3 - 3,6
Special advice
Use disinfectants safely. Always read the label and product information before use.
The product has very good material compatibility with metals and plastics. Keep away from heat and sources of ignition. Further information is available on request. The shelf-life of the opened container can be found on the packaging.
Apply undiluted to the surface, wipe and allow taking effect. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Spray the surface from a distance of approx. 30 cm (approx. 40 ml/m²) and allow drying. For adenovirus and Mycobacterium tuberculosis, maintain the surface wet during the entire exposure time. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices! The product can be used without gloves, provided that infection prevention and occupational safety allow this.
The product has very good material compatibility with metals and plastics. Keep away from heat and sources of ignition. Further information is available on request. The shelf-life of the opened container can be found on the packaging.
Instruction for use
Apply undiluted to the surface, wipe and allow taking effect. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Spray the surface from a distance of approx. 30 cm (approx. 40 ml/m²) and allow drying. For adenovirus and Mycobacterium tuberculosis, maintain the surface wet during the entire exposure time. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices! The product can be used without gloves, provided that infection prevention and occupational safety allow this.
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| mikrozid® universal liquid 5 l | 1/Canister | on request |
| mikrozid® universal liquid 1 l spray bottle (RFL) | 10/Carton | on request |
| mikrozid® universal liquid 1 l bottle (WSP) | 10/Carton | on request |
Application aids
| Item | Item no. |
|---|---|
| schülke dosing feeder 5 l / 10 l (20ml / stroke) | 117101 |
| Decanter funnel | 117901 |
| tap for 5 l / 10 l can | 135502 |
| Can key for 5 + 10 l | 135810 |
| measuring cup 500 ml | 136101 |
| FOAM Spray pump DIN 32 | 180123 |
| Opener all-in-one (1l eurobottle/can/container) | 70000804 |
Environmental information
schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards.
0297Related Products
mikrozid® AF liquid
mikrozid® sensitive liquid
mikrozid® universal wipes premium