MICROSHIELD® Universal bracket
Our Plus
- Clean simple design
- Versatile bracket options
- For both wall and bed-end placement
- Use with any MICROSHIELD® 500ml product
- Holds product securely in place
Fields of Application
- Wall placement
- Placement at the handwash basin
- Patient bed-ends for easy product access
- Placement to encourage compliance and usage
Instructions for use
Remove the separate bottle holder piece on the bracket by pushing up on the round tab on the underside bracket. This will release the bottle holder from the bracket. Insert your choice of MICROSHIELD 500ml product into the holder and then feed the bottle up through the neck opening of the bracket. Push the holder with the bottle down into the bracket. You will hear the holder 'click' into place. Do not discard the holder when replacing the product.
If using the bed-end or hanging attachment - with the front of the bracket facing you, push the small plate with the 3 prongs into the bracket. Now line up and connect the hanging part of the attachment onto the back of the bracket. You should hear the part 'click' into place.
Product data
Dimensions and weights
Dimensions: (w x d x h) 90 x 80 x 195mm
Weight: 130g
Dimensions with bed-end attachment: (w x d x h) 90 x 120 x 195mm
Weight: 175g
Made in New Zealand.
Special advice
To clean the universal bracket use a mild detergent to wipe over the surface or mikrozid® universal wipes. Do not use harsh chemical cleaners or disinfectants.
Information for order
| Item | Delivery form | Item no. |
|---|---|---|
| MICROSHIELD Universal bracket | 1 | 70000404 GTIN: 9350279000661 |
| MICROSHIELD Universal bracket with bed-end attachment | 1 | 70000403 GTIN: 9350279000654 |
| Replacement bed-end attachment | 1 | Upon request |
| Replacement bottle holder component | 1 | Upon request |
These products are not available in every country.
The MICROSHIELD® Universal bracket accommodates both the MICROSHIELD ANGEL 500ml oval bottle and the MICROSHIELD 500ml round bottles.
Made in New Zealand.